Quick Link Menu
DO NOT GO CHANGING ANY OF THE VALUES
IN THIS MENU UNLESS YOU KNOW, WITHOUT A DOUBT, WHAT YOUR DOING.
IF YOU ACCIDENTLY CHANGE SETTINGS,
YOU COULD RENDER YOUR PHONE UNUSABLE.
|
CDMA
Motorola phones (RAZR, v262, v323, v325, v710,
E815, B265)
Quickly press MENU 073887* ( 0SETUP* ).
For RAZR use #073887*.
For V325/323 use CLR 073887*.
Default Security Code Is: 000000 or 12345.
Press OK or SELECT.
From the menu select TEST MODE.
From the next screen highlight ENABLED.
Press OK or SELECT.
The phone will then return to TEST MODE MENU.
Power the phone off and then back on again.
The Signal strength number will be on the 3 rd line down and followed by the
letters MN/A, H/A, or HN/A.
To exit, press MENU followed by the left soft key.
This allows you to toggle in and out.
For RAZR and V325 press CLR and then the upper left soft key.
For some models such as the E815 and RAZR, you may need to dial a fake phone
number to get the signal reading to update.
For some of the Motorola CDMA phones, the following key sequence will
get you into and out of Field Test Mode.
These sequences are known to work on the V60c, v60i, v60s, V120c,
T270c, T720, and T730 series of Motorola CDMA phones.
Scroll down for
Press quickly (if quickly does not work, then do it SUPER quickly!):
Menu
073887*
Use the Security code : 000000
If for some reason the six zero service code does not unlock
the services menu, then your phone has been programmed by your wireless provider
phone manufacturer. You will have to scount around on the 'net to find this
other code. We don't have it here.
Once into the Field Test Menu, enable the Field Test mode through
the menu item.
Pressing the same sequence to enter into Field Test Mode will
gain you access to the Field Test Mode menu and you must select DISABLE
Field Test mode. Failure to properly DISABLE the Field Test Mode may result
in the phone automatically entering into the Field Test Menu/Mode during
normal operation of the phone until you DISABLE it.
Exit Field Test mode with Menu > Left Soft Key
Other Notes of Interest for Motorola Phones:
Have you tried p-h-o-n-e-#-menu-menu?
Works on the V.120c...
Programming the NAM into your phone:
dial 7-4-6-6-3- (these keys spell phone), then # then press "menu"
twice.
this will get you into the NAM programming menu.
Programming other settings into your phone, such as the
-internet browser
-nam activation
-AKEY
-extended NAM (?)
-Vocode
-SPC Overwrite settings
System ID
-SID/NID Pair
and to turn the test mode on or off.
do the following:
press "menu" then 0-7-3-8-8-7-*.
this should get you into the programming menu.
