New England Cellular Sites :: Audiovox Phone Field Test

Many phones that base their firmware off of code licensed from Qualcomm all use the same access method and access code. Even the screen looks the same. This has been seen to possibly happen with Audiovox phones.

AUDIOVOX 8615

Press ##2773 and press END.
Scroll down and select DEBUG.
The signal strength is the 4 th line down on the display.

AUDIOVOX 9100, 9155

WHEN PHONE TURNS ON, AS SOON AS GREEN LIGHT SHUTS OFF,
Press FCN (Right arrow) 00
IT WILL ASK FOR FSC CODE= 000000 (THAT’S 6 ZEROS)
OK, Highlight Debug Screen and press FCN, FCN
Signal strength is the top right number.
On 2nd line, if the letter is upper case (i.e. “A”), then the phone is on the 1900 MHz band.
If lower case (i.e. “a’) is on 800 MHz
To exit test mode: turn off phone.

AUDIOVOX CDM-9900

Power the phone off and then on again. Press MENU, 7, *, *. FSC quickly. The code is 000000.
Press the SELECT Key (the middle button). Then Select DEBUG SCREEN. Select NORMAL.
The signal strength is on the second line after RX. You may have to dial a fake phone number to get the Rx level to update.
Press the POWER OFF button to exit.

DO NOT GO CHANGING ANY OF THE VALUES IN THIS MENU UNLESS YOU KNOW, WITHOUT A DOUBT, WHAT YOUR DOING.

IF YOU ACCIDENTLY CHANGE SETTINGS, YOU COULD RENDER YOUR PHONE UNUSABLE.

Web Site Navigation
Fieldtest Home Page Cell Site Hunting	LG Phones Motorolla Phones Nokia Phones Audiovox Phones Kyocera Phones	Qualcomm Phones Blackberry Phones Siemens Phones Panasonic Phones Sanyo Phones
NECS Home Page \| \| News Page